Reverse Osmosis Specifications
The Hague H3500 Reverse Osmosis System is one of the most efficient RO systems on the market due to Hague's application of the non-electric permeate pump. The permeate pump significantly reduces the amount of water wasted, increases the pressure from the spigot to quickly fill a pitcher or glass and replenishes the holding tank at a higher rate.
|
Reverse Osmosis - Model H3500
|
|
|---|---|
|
Model
|
H3500 |
|
Product #
|
2246U
|
| Membrane Gallons per day1 Liters per day1 WQA GPD2 WQA LPD2 | TFC 20 76 13 49 |
| Water Pressure | 30 -100 Min. -Max. |
| Water Temperature Degrees, F | 40 -113 Min.-Max. |
| Chlorine Tolerance | 0 ppm |
| Max. Hardness | 10 Gr. pg |
| Max. Iron | <0.1 ppm |
| Max. Mang. | <0.05 ppm |
| pH Limit | 4.0 -11.0 |
| Max.TDS Limit | 2000 ppm |
| Hydrogen Sulfide | 0.00 ppm |
| Max. Turbidity | 1.0 NTU |
| Typical Rejection WQA Rejection | 97%-98% @ 60 psi 89% @ 50 psi |
| Storage | 3.1 Gal. |
| Water Supply | Municipal, Well, Non-Chlorinated |
| Treatment Stages | 5 Stage |
| Prefiltration | 1 Mic. Sediment / Carbon Block |
| PCF | Standard |
| Postfilter | GAC |
| Height (inches) | 16-3/4 |
| Width (inches) | 14-1/2 |
| Depth (inches) | 7 |
| Weight | 35 lbs. |
|
1 Product output is measured to atmosphere with feed
water of 77 degrees F, 60 PSIG and 360 ppm TDS. 2 NSF production is measured against a pressure tank @ 5 psi backpressure, 77 degrees F, 50 PSIG and 750 mgIL + 40 mgIL TDS. NOTE: Actual production rates may vary depending on water temperature, pressure, TDS level and membrane type. |
|